C2100B SERIES
Grain Dryers
We feature Farm Fans as our continuous flow and batch dryers, we can custom design the right system to fit your operation. We also feature the Farm Fans axial vane and centrifugal fans.
The C2100B Series Farm Fans grain dryers are designed for large capacities in a low profile design. Quiet, Double Inlet Double Width centrifugal fans, high torque starting are standard in the C2100B Series models. Vari-Trol® automatic moisture control, electronic modulating plenum temperature control with a Maxon safety shutdown valve and safety shutdown diagnostics are standard on these workhorses. Dual Maxon valves are used on natural gas models. There are models available for pressure cool, vacuum cool or full heat operation. Optional heat reclaimers are also available for vacuum cool models. For maximum flexibility and cost-efficiency plus performance and reliability that you demand, choose the C2100B Series dryers from Farm Fans.
C2100B Dryer Specifications
| C2130B | C2130B1 | C2140B | C2140B1 | C2160B | |
|---|---|---|---|---|---|
| Grain Column Width | 14" | 14" | 14" | 14" | 14" |
| Holding Capacity (Total) | 595 Bu. | 595 Bu. | 775 Bu. | 775 Bu. | 1010 Bu. |
| Holding Capacity (Column) | 460 Bu. | 460 Bu. | 600 Bu. | 600 Bu. | 781 Bu. |
| Installed Dimensions | |||||
| Grain Section Length | 20' | 20' | 26' | 26' | 34' |
| Fan-Heater Sect. Length | 11'-1" | 11'-1" | 11'-1" | 11'-1" | 12'-6" |
| Total Length | 33'-3" | 33'-3" | 39'-3" | 39'-3" | 48'-9" |
| Width -w/heat reclaiming | 11'-0" | 11'-0" | 11'-0" | 11'-0" | 11'-0" |
| Width -w/o heat reclaiming | 8'-0" | 8'-0" | 8'-0" | 8'-0" | 8'-0" |
| Overall Height1 | 17'-2" | 17'-2" | 17'-2" | 17'-2" | 17'-2" |
| Centrifugal Fan Type | DIDW | DIDW | DIDW | DIDW | DIDW |
| Fan Motor | 30 HP | 30 HP | 40 HP | 40 HP | 60 HP |
| Burner (Max. Cap. [Millions]) | 7M BTU/Hr. | 7M BTU/Hr. | 9M BTU/Hr. | 9M BTU/Hr. | 12M BTU/Hr. |
| Top Auger Capacity |
8",7.5 HP 2800BPH | 8",7.5 HP 2800BPH | 8",10 HP 2800BPH |
8",10 HP 2800BPH | 8",10 HP 2800BPH |
| Bottom Auger Capacity |
8",5 HP 1350 BPH | 8",5 HP 1350 BPH | 8",7.5 HP 17600 BPH |
8",7.5 HP 1760 BPH | 8",10 HP 2300 BPH |
| Meter Roll Drive | 3/4 HP, SCR | 3/4 HP, SCR | 3/4 HP, SCR | 3/4 HP, SCR | 3/4 HP, SCR |
| Electrical Load - Dryer Only (3-PH) |
117 Amp. @ 230V 59Amp. @ 460V | 117 Amp. @ 230V 59Amp. @ 460V | 155 Amp. @ 230V 78Amp. @ 460V |
155 Amp. @ 230V 78Amp. @ 460V | 205 Amp. @ 230V 103Amp. @ 460V |
| Drying Capacity2 | |||||
| Full Heat 20-15%3 | -- | 945 BPH | -- | 1220 BPH | -- |
| Full Heat 25-15%3 | -- | 550 BPH | -- | 720 BPH | -- |
| Dry & Cool 20-15% | 595 BPH | -- | 774 BPH | -- | 1010 BPH |
| Dry & Cool 25-15% | 350 BPH | -- | 455 BPH | -- | 585 BPH |
| 1. Overall height includes 24" high foundation support, less 8" hopper. | |||||
| 2. Capacities listed are wet bushels, shelled corn at listed input moisture content and are estimates based on drying principles, field results and computer simulation. Variance may occur due to grain's physiological factors (kernel size, chemical composition, variety, maturity), excessive fines, adverse weather conditions, etc. | |||||
| 3. Grain discharged hot from the dryer at approximately 17% output moisture should result in a final moisture content of approximately 15% after cooling (dryeration). | |||||
IMPORTANT: Because of continuing product improvements, ffi Corporation reserves the right to change specifications
without notice. Dimensional specifications are provided for planning purposes only.
NOTE: Heat relaimers are available as an option.
Pages: 1 - 2 [NEXT > >]
| Grain Bins | Augers | Handling & Conditioning Equipment | Pre-owned Equipment |
| Ag & Commercial Buildings | Grain Dryers & Fans | Lawnmowers, Trimmers & Blowers | Other Links | Email | Home |
