C2100B SERIES
Grain Dryers
C2100B Dryer Specifications
| C2160B1 | C2175B | C2175B1 | C21100B | C21100B1 | |
|---|---|---|---|---|---|
| Grain Column Width | 14" | 14" | 14" | 14" | 14" |
| Holding Capacity (Total) | 1010 Bu. | 1010 Bu. | 1010 Bu. | 1129 Bu. | 1129 Bu. |
| Holding Capacity (Column) | 781 Bu. | 781 Bu. | 781 Bu. | 873 Bu. | 873 Bu. |
| Installed Dimensions | |||||
| Grain Section Length | 34' | 34' | 34' | 38' | 38' |
| Fan-Heater Sect. Length | 12'-6" | 12'-6" | 12'-6" | 12'-6" | 12'-6" |
| Total Length | 48'-9" | 48'-9" | 48'-9" | 52'-9" | 52'-9" |
| Width -w/heat reclaiming | 11'-0" | 11'-0" | 11'-0" | 11'-0" | 11'-0" |
| Width -w/o heat reclaiming | 8'-0" | 8'-0" | 8'-0" | 8'-0" | 8'-0" |
| Overall Height1 | 17'-2" | 17'-2" | 17'-2" | 17'-2" | 17'-2" |
| Centrifugal Fan Type | DIDW | DIDW | DIDW | DIDW | DIDW |
| Fan Motor | 60 HP | 75 HP | 75 HP | 100 HP | 100 HP |
| Burner (Max. Cap. [Millions]) | 12M BTU/Hr. | 12M BTU/Hr. | 12M BTU/Hr. | 12M BTU/Hr. | 12M BTU/Hr. |
| Top Auger Capacity |
8",10 HP 2800BPH | 8",10 HP 2800BPH | 8",10 HP 2800BPH |
8",15 HP 2800BPH | 8",15 HP 2800BPH |
| Bottom Auger Capacity |
8",10 HP 2300 BPH | 8",10 HP 2300 BPH | 8",10 HP 2300 BPH |
8",10 HP 2570 BPH | 8",10 HP 2570 BPH |
| Meter Roll Drive | 3/4 HP, SCR | 3/4 HP, SCR | 3/4 HP, SCR | 3/4 HP, SCR | 3/4 HP, SCR |
| Electrical Load - Dryer Only (3-PH) |
205 Amp. @ 230V 103Amp. @ 460V | 240 Amp. @ 230V 120Amp. @ 460V | 240 Amp. @ 230V 120Amp. @ 460V |
295 Amp. @ 230V 150Amp. @ 440V | 295 Amp. @ 230V 150Amp. @ 440V |
| Drying Capacity2 | |||||
| Full Heat 20-15%3 | 1610 BPH | -- | 1680 BPH | -- | 1900 BPH |
| Full Heat 25-15%3 | 940 BPH | -- | 980 BPH | -- | 1100 BPH |
| Dry & Cool 20-15% | -- | 1070 BPH | -- | 1210 BPH | -- |
| Dry & Cool 25-15% | -- | 620 BPH | -- | 700 BPH | -- |
| 1. Overall height includes 24" high foundation support, less 8" hopper. | |||||
| 2. Capacities listed are wet bushels, shelled corn at listed input moisture content and are estimates based on drying principles, field results and computer simulation. Variance may occur due to grain's physiological factors (kernel size, chemical composition, variety, maturity), excessive fines, adverse weather conditions, etc. | |||||
| 3. Grain discharged hot from the dryer at approximately 17% output moisture should result in a final moisture content of approximately 15% after cooling (dryeration). | |||||
IMPORTANT: Because of continuing product improvements, ffi Corporation reserves the right to change specifications
without notice. Dimensional specifications are provided for planning purposes only.
NOTE: Heat relaimers are available as an option.
Pages: [< < BACK] 1 - 2
| Grain Bins | Augers | Handling & Conditioning Equipment | Pre-owned Equipment |
| Ag & Commercial Buildings | Grain Dryers & Fans | Lawnmowers, Trimmers & Blowers | Other Links | Email |
| Home |
