1.     The Shivvers Circu-Lator II is the heart of the Performance System. Because of it's scientifically engineered design the Circu-Lator II removes an even layer of dry grain from the floor of the drying bin and transfers it through the Continuous Flow Auger System. The design of the Circu-Lator II gives you built-in wet holding for "true" 24 hour a day drying. The last bin full of grain is normally recirculated under automatic control until dry.
   
   
2.     The easy to use CompuDry Command Center provides automatic moisture control without baby-sitting. Simply set your desired moisture and drying temperature needed. The Shivvers Performance System is an unparalleled automatic drying system which prevents the extra expense of over-drying. You start the evening with an ample overnight supply of wet holding in the dryer. The CompuDry Command Center accurately and dependably controls the moisture of the dried grain as it is automatically transferred to your storage bins by the system of heavy duty transfer augers. The system automatically stops when the grain supply runs low, and a printed record of the night's operation is available for your inspection in the morning.
   
   
3.     The high capacity Shivvers Grain Spreader distributes the incoming grain evenly within the drying bin for even drying.
   
   
4.     Shivvers heavy duty Continuous Flow Augers transfer the grain to any storage bin in the system conveniently and economically.
   
   
5.     The Shivvers Blue Flame Dryer with its 3,650,000 BTU is the largest burner made for a 28" dryer. This powerful, yet gentle fan and heater combination provides enough "umph" to warm freezing air to 200º F, even with an airflow enhancing Turbo-Booster fan attached (optional). The Blue Flame provides the most evenly heated drying air for a Continuous Flow Dryer. This combination can overcome conditions of over 10" static pressure for speedy drying with a filled bin.
   
   
6.     With 23% open area, Shivvers perforated Channel-Lock Drying Floor and Steel Floor Supports allow maximum air flow from the plenum chamber up into the grain.

Your Shivvers Certified Performance System is:

• 24', 27', 30', 33', 36', or 42'
• Motor for Circu-Lator with Overload Heaters and 3-Groove Motor Pulley
• Center Vertical (16'9" or 18'5") determined by static pressure from fans selected
• Tapered Sweep selected for appropriate capacity range

• Command Center Printer
• Dial Thermometer
• Static Pressure Gauge

• Blue Flame Dryer, LP or NG
• Transition
• Entrance Collar with Special Balancing Vanes
• One Clean-out Door per Blue Flame
• Transition Dampers as required
• Turbo-Boosters as specified

• Channel Lock Floor with 23% open area
• Steel Supports for Circu-Lator

• 1 HP Grain Hog Spreader
• 1.5 HP Grain Hog Spreader (optional)

• Basic Continuous Flow Auger (20')
• Extensions
• Grain Sampler
• Roof Brace(s) required for length
• Motor for Transfer Auger selected
• Magnetic Starter and Overload Heaters
• 2-Groove Pulley for Transfer Motor